home product range easy to install easy to use technical info


Dimensions

The Q-tek Bidet electronic bidet seat is adjustable, and will fit a wide range of toilet systems. Check these measurements to ensure the bidet will fit comfortably on your particular system.

 

Model Designations
Anova
Arcadia
Round Seat
DZ101G DZ62-II-G
Oval seat
DZ101GC DZ62-II-GC

Dimension
Round models
Anova DZ101G
Arcadia DZ62-II-G
Oval models
Anova DZ101GC
Arcadia DZ62-II-GC
A
 Distance between fastening points 140 mm 140 mm
B
 Distance from left fixing point to side wall greater than 200mm greater than 200mm
C
 Distance from fastening point to front of bowl between 440mm and 495mm between 465mm and 520mm
D
 Distance from cistern or downpipe to front of bowl (measured from the rearmost point to which you can push the bidet seat back) greater than 510mm greater than 535mm
E
 Width of bowl at widest section (measured between the inside walls) between 220mm and 260mm between 220mm and 260mm

 

For general enquiries about the Q-tek electronic bidet seat, you can call Sal direct on (02) 9592-2355
Copyright © 2006 SAL Australia ABN 11 465 713 970 where to buy | contact us | warranty