• LED EMERGENCY

LED STD25EM - 18/36W

Wide body LED 18-36 watt surface mount diffused linear batten

Application

Conventional linear LED batten profile ideal for residential and commercial spaces

Design Specifications

  • Durable metal body profile, white powder coat finish

  • High efficiency LED T8 tubes fitted, choice of 3000K, 4000K, 6000K, CRI>80

  • Large terminal block, easy installation, safety fuse included

  • High performance PMMA prism diffuser, beam distribution 120 degree

  • Non maintained, independent emergency end cap, emergency with LiFePO4 battery included compliant to AS/NZS2293

  • LED charge status display and test switch, guaranteed 90 minutes emergency function

Performance

  • Dimmable - NO
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

     
  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Power CRI Beam Angle Body Colour Dim Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      Close
    Model No.STD25/206EM Input Voltage240 Power18 CRI80 Beam Angle120 Body ColourWHITE Dim630(L) x 109(W) x 83(H) Add to Enquiry Add Remove Remove
    Model No.STD25/212EM Input Voltage240 Power36 CRI80 Beam Angle120 Body ColourWHITE Dim1260(L) x 109(W) x 83(H) Add to Enquiry Add Remove Remove

    Important notes: (1) Battery warranty twelve (12) months (2) In the interest of transport and safety, emergency products are supplied with the battery disconnected. (3) In addition to specific emergency commissioning instructions, the battery MUST be connected at the time of installation. (4) Continual use in emergency mode greater than 240 hours without recharge, will result in battery failure and void battery warranty.

(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products