• LED STRIP LIGHTS

12V LV SINGLE COLOUR LED STRIP IP44 FL1206/S-6W/M

An innovative selection of cuttable single colour LED strips

Application

Versatile single colour IP44 LED colour strips

Design Specifications

  • High efficiency SMD LED chips with 3M self adhesive tape

  • Maximum roll length 5m, cuttable every 50mm

  • Connection length can be extended by certain LED driver, controllers and repeaters

  • Heat sink and 12V constant voltage LED driver required, LED colours Red, Green Blue

  • Dimming options:
    Type A trailing edge dimming,
    Type B LED controller LT8903DIM, LT8905DIM and LT8904DIM/RP,
    Type C analogue 1-10V

  • Beam distribution 115 degree, 6W/m, LED quantity 60/m

Performance

Dimmable - OPTIONAL
Dimmer Type - refer dimming options
 
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • Technical Specifications
    Model No. Description Input Voltage Watts per metre Beam Angle Luminous Flux Per Meter Dimensions Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FL1206RD5M/S DescriptionRED STRIP 5M ROLL IP44 Input Voltage12 Watts per metre6 Beam Angle115 Luminous Flux Per Meter120 Dimensions10(W) x 3.5(H) Add to Enquiry Add Remove Remove
    Model No.FL1206GN5M/S DescriptionGREEN STRIP 5M ROLL IP44 Input Voltage12 Watts per metre6 Beam Angle115 Luminous Flux Per Meter220 Dimensions10(W) x 3.5(H) Add to Enquiry Add Remove Remove
    Model No.FL1206BU/5M/S DescriptionBLUE STRIP 5M ROLL IP44 Input Voltage12 Watts per metre6 Beam Angle115 Luminous Flux Per Meter60 Dimensions10(W) x 3.5(H) Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products