• LED STRIP LIGHTS

FLEXI 12V LV SINGLE COLOUR IP44, FL1206/S-6W/M

Run length 5 metre, IP44, LED single coloured strips

Application

Versatile single coloured IP44 LED strips

Design Specifications

  • High efficiency SMD LED chips with 3M self adhesive tape

  • Maximum run per driver 5m, cuttable every 50mm

  • Connection length can be extended by certain LED driver, controllers and repeaters

  • Heat sink and 12V constant voltage driver required

  • Dimming options: (refer category introduction)

    Type A - Trailing edge dimming,

    Type B - LED strip controller LT8915DIM/BT 
    with LT8914DIM/RP if required, 

    Type C - Analogue 1-10V

  • LED channel options refer this section

Performance

Dimmable - OPTIONAL
Dimmer Type - refer dimming options
 
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • Technical Specifications
    Model No. Description Input Voltage Watts per metre Beam Angle Luminous Flux Per Meter LEDs Per Metre Dim Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      Close
    Model No.FL1206RD/S DescriptionRED STRIP IP44 Input Voltage12 Watts per metre6 Beam Angle115 Luminous Flux Per Meter120 LEDs Per Metre60 Dim10(W) x 3.5(H) Add to Enquiry Add Remove Remove
    Model No.FL1206GN/S DescriptionGREEN STRIP IP44 Input Voltage12 Watts per metre6 Beam Angle115 Luminous Flux Per Meter220 LEDs Per Metre60 Dim10(W) x 3.5(H) Add to Enquiry Add Remove Remove
    Model No.FL1206BU/S DescriptionBLUE STRIP IP44 Input Voltage12 Watts per metre6 Beam Angle115 Luminous Flux Per Meter60 LEDs Per Metre60 Dim10(W) x 3.5(H) Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products