• LED STRIP LIGHTS

FLEXI 12V WHITE COLOUR IP67, FL1209/SR - 9W/M

Run length 5 metre, IP67, LED single colour white strip

Application

Exterior feature lighting, residential or commercial spaces

Design Specifications

  • High efficiency SMD LED chips, silicon covered

  • Max run per driver 5m, cuttable every 25mm, dimmable with compatible drivers.

  • Heat sink and 12V constant voltage driver required

  • Dimming options: (refer category introduction)

    Type A - Trailing edge dimming,

    Type B - LED strip controller LT8915DIM/BT 
    with LT8914DIM/RP if required, 

    Type C - Analogue 1-10V

  • LED channel options refer this section

 
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • Technical Specifications
    Model No. Input Voltage Watts per metre Beam Angle CRI Luminous Flux Per Meter LEDs Per Metre Dim Colour Temp. Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FL1209WW/SR Input Voltage12 Watts per metre9 Beam Angle115 CRI80 Luminous Flux Per Meter500 LEDs Per Metre120 Dim12(W) x 4.5(H) Colour Temp.3000 Add to Enquiry Add Remove Remove
    Model No.FL1209CW/SR Input Voltage12 Watts per metre9 Beam Angle115 CRI80 Luminous Flux Per Meter500 LEDs Per Metre120 Dim12(W) x 4.5(H) Colour Temp.4000 Add to Enquiry Add Remove Remove
    Model No.FL1209DL/SR Input Voltage12 Watts per metre9 Beam Angle115 CRI80 Luminous Flux Per Meter500 LEDs Per Metre120 Dim12(W) x 4.5(H) Colour Temp.6000 Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products