• LED STRIP LIGHTS

FLEXI 24V SINGLE COLOUR IP20 FL2406/R05-6W/M

Run length 5 metre, 24V narrow single colour LED Strip, IP20

Application

A creative solution for residential and commercial interior spaces

Design Specifications

  • High efficiency SMD LED chips with 3M self-adhesive tape.

  • Maximum run length 5m, cuttable every 100 mm at
    scissors symbol ✂

  • Heat sink and 24V constant voltage LED driver required.

  • Dimming options: (refer category introduction)
    Type A - Trailing edge dimming,
    Type B - LED strip controller LT8915DIM/BT
    with LT8914DIM/RP if required,
    Type C - Analogue 1-10V

  • LED channel options refer this section

Performance

Dimmable - OPTIONAL
Dimmer Type - refer dimming options
 
  • WARM WHITE3000K
  • DAYLIGHT5000K
  • WARM WHITE3000K
  • DAYLIGHT5000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • Technical Specifications
    Model No. Input Voltage Watts per metre Beam Angle Body Colour CRI Luminous Flux Per Meter LEDs Per Metre Dim Colour Temp. Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FL2406WW/R05 Input Voltage24 Watts per metre6 Beam Angle115 Body ColourCLEAR CRI80 Luminous Flux Per Meter460 LEDs Per Metre60 Dim5(W) x 1.4(H) Colour Temp.3000 Add to Enquiry Add Remove Remove
    Model No.FL2406NDL/R05 Input Voltage24 Watts per metre6 Beam Angle115 Body ColourCLEAR CRI80 Luminous Flux Per Meter460 LEDs Per Metre60 Dim5(W) x 1.4(H) Colour Temp.5000 Add to Enquiry Add Remove Remove
    Model No.FL2406BU/R05 Input Voltage24 Watts per metre6 Beam Angle115 Body ColourBLUE CRI Luminous Flux Per Meter85 LEDs Per Metre60 Dim5(W) x 1.4(H) Colour Temp.BLUE Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products