Run length 5 metre, IP65, LED single colour COB LED strip - RED / BLUE


Interior feature lighting, residential or commercial spaces

Design Specifications

  • Streamline COB LED chip technology, providing a smooth lighting profile

  • Single colour RED / BLUE strip, with self adhesive tape for easy installation. Red 625 nm, Blue 450nm.

  • Roll length 20M, (order per metre), maximum length per run 5m, cuttable every 50mm, dimmable with compatible drivers.

  • Heat sink and 24V constant voltage driver required

  • Dimming options: (quick link)
    Type A - Trailing edge dimming,
    Type B - LED strip controller LT8915DIM/BT
    with LT8914DIM/RP if required,
    Type C - Analogue 1-10V
    Type D - DALI 2 control

  • LED channel options (quick link)


  • Dimmable - OPTIONAL
  • Dimmer Type - Refer dimming options
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Watts per metre Beam Angle Body Colour Luminous Flux Per Meter LEDs Per Metre Dim Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FLB2410RD/SS Input Voltage24 Watts per metre10 Beam Angle140 Body ColourRED Luminous Flux Per Meter140 LEDs Per Metre320 Dim1000(L) x 8(W) x 2(H) Add to Enquiry Add Remove Remove
    Model No.FLB2410BU/SS Input Voltage24 Watts per metre10 Beam Angle140 Body ColourBLUE Luminous Flux Per Meter140 LEDs Per Metre320 Dim1000(L) x 8(W) x 2(H) Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products