• LED STRIP LIGHTS

FLEXI 24V WHITE COLOUR CRI90, FLL2412/SS10R9-12W/M

Run length 20 metre, CRI>90, 24V, LED Strip IP65

Application

A creative solution for residential and commercial interior spaces, requiring 20 metre run length

Design Specifications

  • High efficiency SMD LED chips with 3M self-adhesive tape,
    12W/m CRI>90

  • Maximum run per driver 20m, cuttable every 50 mm
    at scissors symbol.

  • Heat sink and 24V constant voltage LED driver required

  • Dimming options: (refer category introduction)
    Type A - Trailing edge dimming,
    Type B - LED strip controller LT8915DIM/BT
    with LT8914DIM/RP if required, 
    Type C - Analogue 1-10V 

  • LED channel options refer this section

  • Heat sink and 24V constant voltage LED driver required

Performance

Dimmable - OPTIONAL
 
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • Technical Specifications
    Model No. Input Voltage Watts per metre Beam Angle Body Colour CRI Luminous Flux Per Meter LEDs Per Metre Dim Colour Temp. Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FLL2412WW/SS10R9 Input Voltage24 Watts per metre12 Beam Angle115 Body ColourCLEAR CRI90 Luminous Flux Per Meter980 LEDs Per Metre120 Dim10(W) x 1.6(H) Colour Temp.3000 Add to Enquiry Add Remove Remove
    Model No.FLL2412CW/SS10R9 Input Voltage24 Watts per metre12 Beam Angle115 Body ColourCLEAR CRI90 Luminous Flux Per Meter980 LEDs Per Metre120 Dim10(W) x 1.6(H) Colour Temp.4000 Add to Enquiry Add Remove Remove
    Model No.FLL2412DL/SS10R9 Input Voltage24 Watts per metre12 Beam Angle115 Body ColourCLEAR CRI90 Luminous Flux Per Meter980 LEDs Per Metre120 Dim10(W) x 1.6(H) Colour Temp.6000 Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products