• LINEAR BATTENS & PROFILES

LEDLINE SLD2000 - 20W

LED diffused batten 20 watt

Application

Conventional LED linear surface mount batten for commercial service spaces

Design Specifications

  • Pressed steel body profile

  • White powder coat finish with an opal PMMA diffuser

  • High efficiency LED optics, CRI > 80, 4000K

  • Integral constant current non-dimmable LED driver 20 watt, with dimming and sensor options available

  • Large terminal block, easy installation

  • Unique diffuser design allows end to end installation, emergency options available, non-dimmable corridorSTANDBY options available

Performance

  • Dimmable - OPTIONAL
  • Dimmer Type - Trailing edge, 1-10V, DALI / DSI
  • In Built Sensor - OPTIONAL
  • Sensor Type - MICROWAVE
  • COOL WHITE4000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

     
  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Power Lumens CCT CRI Beam Angle Dimmable Dim Body Colour IPART Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      Close
    Model No.SLD2000CW Input Voltage240 Power20 Lumens1900 CCT4000 CRI80 Beam Angle120 Dimmable OPTIONAL Dim600(L) x 100(W) x 77(H) Body ColourWHITE IPARTYES Add to Enquiry Add Remove Remove
    Model No.SLD2000CW/C Input Voltage240 Power20 Lumens1900 CCT4000 CRI80 Beam Angle120 Dimmable NO Dim600(L) x 100(W) x 77(H) Body ColourWHITE IPART Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products