• LED STRIP LIGHTS

FLEXI 24V WHITE COLOUR IP65, FLL2406/SS10-6W/M

Run length 20 metre, CRI> 80, 24V, LED Strip IP65

Application

A creative solution for residential and commercial interior spaces, requiring 20 metre run lengths

Design Specifications

  • High efficiency SMD LED chips with 3M self-adhesive tape, 6 watt p/m

  • Maximum run length 20m, cuttable every 100 mm
    at scissors symbol ✂ , silicon spray coating

  • Heat sink required for system performance and 24V constant voltage LED driver required

  • Dimming options: (quick link)
    Type A - Trailing edge dimming, 
    Type B - LED strip controller LT8915DIM/BT with
    LT8914DIM/RP if required 
    Type C - Analogue 1-10V
    Type D - DALI 2 control 

  • LED channel options (quick link)

Performance

  • Dimmable - OPTIONAL
  • Dimmer Type - refer dimming options
  • WARM WHITE3000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
    • Dimensions - Wiring Diagrams
    • Design Options
    • Photometric Data
    • FAQ

      Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

       
    • Downloads
    • Technical Specifications
      Product Model No. Add to Enquiry
      Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      		Input Voltage Watts per metre Beam Angle CRI Lumens LEDs Per Metre Cutting Interval CCT Body Colour Dim
      		Model No. FLL2406DL/SS10 Add to Enquiry Add Remove Remove Input Voltage 24 Watts per metre 6 Beam Angle 115 CRI 80 Lumens 500 LEDs Per Metre 60 Cutting Interval 100 CCT 6000 Body Colour CLEAR Dim 10(W) x 1.6(H)
    (1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
    With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

    Related Products