• STRIP LIGHTS

FLEXI SMART 12V RGB COLOUR IP44, FLP12V/RGBBT

PIXIE MASTER DEVICE - 2m RGB smart lighting LED strip kits

Application

Home theatre, bar features, decorative task illumination demanding smart controls

Design Specifications

  • Smart LED strip kit colour and brightness controlled via the SAL PIXIE or PIXIE PLUS  apps.

  • Four different flashing modes with dimming memory function

  • High performance, stable, even light output, pre-wired for easy installation, plug-in & ready to use and cuttable every 100 mm.  NOTE: when cutting LED strips, it is always important to calculate the remaining LED load to reconfirm its compatibility with the existing driver, as driver changes may be required with moderate reduction in loads

  • 2m kits available, IP44 strip only, IP20 driver.

  • Heatsink required for system performance, LED channel options refer this section

  • Dimming is achieved via the PIXIE or PIXIE PLUS app (strip controller if supplied) or via a SAL Multifunction control. Trailing edge dimmers are not suitable

Performance

  • Dimmable - YES
  • Dimmer Type - PIXIE control
LIMITED STOCK
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

     
  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Watts per metre Beam Angle LEDs Per Metre Cutting Interval Colour Temp. Body Colour Dim Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FLP12V2M/RGBBT Input Voltage240 Watts per metre6 Beam Angle115 LEDs Per Metre30 Cutting Interval100 Colour Temp.RGB Body ColourRGB Dim2000(L) x 10(W) x 3(H) Add to Enquiry Add Remove Remove


     

(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products