PIXIE MASTER DEVICE - Dimmable control with rippleSHIELD technology, when paired with SAL rippleSHIELD downlights with bell press termination leads


Ideal for any residential or commercial interior spaces where nuisance ripple induced flicker is visible

Design Specifications

  • Digital push button control, with three (3) complimentary key caps provided to suit most switch plates

  • Combined with the SAL rippleSHIELD downlights Ecogem or Unifit series, the rippleSHIELD dimmer eliminates nuisance ripple induced flicker between 750-1050Hz once and for all.

  • Smooth dimming performance to 1.0% of light output

  • PIXIE connectivity is achieved via the PIXIE / PIXIE PLUS app or paired secondary device.

  • Refer installation instructions for load compatibility chart.

  • Need more info......slide to the FAQ's below


  • Dimmable - YES
  • Dimmer Type - SFI Trailing edge SDD400SFI ONLY
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Power Dim Body Colour Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.SDD400SFI/BP Input Voltage240 Power250 Dim42(L) x 24(W) x 24(H) Body ColourWHITE CAP Add to Enquiry Add Remove Remove

    Patent pending

(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products