• LED SOLAR

PERIMELED - SSPA6000/12000

IP66 LED SOLAR area luminaire - 6000 / 12000 lumens, remote solar panel with sensor functions

Application

A sustainable area luminaire solution for commerical exterior spaces

Design Specifications

  • Supplied as a buildable kit including a solar charging panel and column mount bracket system, LiFePO4 technology battery, remote control for mode selections, cable array, luminaire with integral gear and out-reach arm. (column sourced separately).

  • High efficiency LED optics, choice of 6000 or 12000 lm systems, CRI >80, CCT 4000K, non-dimmable integral driver, beam distribution type II.

  • Lithium battery technology, with overcharge, over-discharge and load short circuit protection, with selectable sensor and dusk to dawn modes.

  • Charge time 4 hours full sun (1000W/m²)

  • Luminaire is a robust aluminium design, finished in silver powercoat

  • Remote control included with multi-function modes and dusk to dawn control - refer installation instructions for settings.

Performance

  • In Built Sensor - YES
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

     
  • Downloads
  • Technical Specifications
    Power Colour Temp. Lumens CRI Mass Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      Close
    Power30 Colour Temp.4000 Lumens6000 CRI80 Mass4 Add to Enquiry Add Remove Remove
    Power60 Colour Temp.4000 Lumens12000 CRI80 Mass5.2 Add to Enquiry Add Remove Remove
    Power Colour Temp. Lumens CRI80 Mass0.2 Add to Enquiry Add Remove Remove

    note: IP rating of IP66 is luminaire head only.

     

(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy. Search a trade partner nearby

Related Products