Versatile, COB RGB and tunable white LED, 5m strip kit, 6W/m, IP20, strip width 12mm.


Ideal for residential features

Design Specifications

  • 5 metre strip kit includes COB strip with self-adhesive tape, plug and play driver

  • Beam distribution 140°

  • RGB and tunable white selections 2700-6500K (CRI>90 tunable white)

  • Dimming, light level, colour and mode selection is via the supplied remote control.

  • Heat sink required for system performance, LED channel options refer this section  - LED channel options (quick link)

  • Cuttable every 125mm NOTE: when cutting LED strip kits greater than 50% of the kit length, it is always important to calculate the remaining LED load to reconfirm its compatibility with the existing driver, as driver changes may be required with moderate reduction in loads


  • Dimmable - YES
  • Dimmer Type - RGB Controller
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Watts per metre Beam Angle LEDs Per Metre Cutting Interval Body Colour Dim Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FLBP24V5M/RGBTW Input Voltage240 Watts per metre6 Beam Angle140 LEDs Per Metre560 Cutting Interval125 Body ColourRGBTW Dim5000(L) x 12(W) x 2(H) Add to Enquiry Add Remove Remove

    RGB WAVELENGTHS R:620-625, G:515-520, B:465-470nm, TUNABLE WHITE 2700-6500K

(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products