• LED STRIP LIGHTS

FLEXI 24V WHITE COLOUR IP20, FLH2420-20W/M

Run length 5 metre, 24V, HIGH OUTPUT LED Strip, IP20

Application

A creative solution for residential and commercial interior spaces

Design Specifications

  • High output greater than 1500lm/m

  • High efficiency SMD LED chips with 3M adhesive tape

  • Maximum run length 5m, cuttable every 62.5 mm
    at scissors symbol ✂

  • Heat sink and 24V constant voltage LED driver required

  • Dimming options: ( refer category introduction)
    Type A - Trailing edge dimming,
    Type B - LED strip controller LT8915DIM/BT
    with LT8914DIM/RP if required,
    Type C - Analogue 1-10V

  • LED channel options refer this section

Performance

Dimmable - OPTIONAL
Dimmer Type - refer dimming options
 
  • COOL WHITE4000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • COOL WHITE4000K
  • COOL WHITE4000K
  • DAYLIGHT6000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • Technical Specifications
    Model No. Description Input Voltage Watts per metre Beam Angle Lumens Body Colour CRI LEDs Per Metre Dim Colour Temp. Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
    Model No.FLH2420 WW DescriptionHIGH OUTPUT 24V IP20 3K Input Voltage24 Watts per metre20 Beam Angle115 Lumens1700 Body ColourCLEAR CRI80 LEDs Per Metre96 Dim8(W) x 2(H) Colour Temp.3000 Add to Enquiry Add Remove Remove
    Model No.FLH2420 CW DescriptionHIGH OUTPUT 24V IP20 4K Input Voltage24 Watts per metre20 Beam Angle115 Lumens1800 Body ColourCLEAR CRI80 LEDs Per Metre96 Dim8(W) x 2(H) Colour Temp.4000 Add to Enquiry Add Remove Remove
    Model No.FLH2420 DL DescriptionHIGH OUTPUT 24V IP20 6K Input Voltage24 Watts per metre20 Beam Angle115 Lumens2000 Body ColourCLEAR CRI80 LEDs Per Metre96 Dim8(W) x 2(H) Colour Temp.6000 Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby