• LED STRIP LIGHTS

NEON TOP BEND 24V SINGLE COLOUR IP67 FLN2410 - 10W/M

Roll length 10m, maximum run length 10m, flexible Neon TOP Bend strip, 24V, IP67, strip width 12mm.

Application

A very flexible solution for residential and commercial interior spaces

Design Specifications

  • High efficiency LED optics, luminous efficacy up to 430lm/m, beam distribution 120°

  • Maximum run length 10m, cuttable every 50 mm, 400mm tail

  • Single bin with smooth colour uniformity

  • CCT 3000K, CRI >80

  • Non-dimmable

  • Power supply ordered separately, 10 W/m, termination accessories available, codes listed are per metre, 10M roll packs to order

Performance

  • Dimmable - OPTIONAL
  • Dimmer Type - refer dimming options
  • WARM WHITE3000K
    • Dimensions - Wiring Diagrams
    • Design Options
    • Photometric Data
    • FAQ

      Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

       
    • Downloads
    • Technical Specifications
      Product Model No. Add to Enquiry
      Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      		Input Voltage Dimmable Watts per metre Beam Angle CRI Lumens per metre LEDs Per Metre Cutting Interval CCT Dim
      		Model No. FLN2410WW1312T Add to Enquiry Add Remove Remove Input Voltage 24 Dimmable OPTIONAL Watts per metre 10 Beam Angle 120 CRI 80 Lumens per metre 430 LEDs Per Metre 120 Cutting Interval 50 CCT 3000 Dim 12(W) x 12(H)

      Note: For exterior applications, installation in spaces exposed to direct UV exposure is not recommended

    (1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
    With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

    Related Products