• STRIP LIGHTS

FLEXI 24V SINGLE COLOUR 10M KIT FLP24V10M/SS-6W/M

Run length 10M, versatile IP65, CRI>80, LED single colour white, 10M strip kit

Application

Versatile IP65 LED white colour strip kit ideal for residential features

Design Specifications

  • 10 metre LED strip with 3M self-adhesive tape,
    plug and play IP20 driver

  • Choice of 3000 / 5000K, CRI>80

  • Non-dimmable driver as standard, optional dimmable driver to order.

  • Heat sink required for system performance, LED channel options refer this section

  • Cuttable every 100mm 
    NOTE: when cutting LED strips, it is always important to calculate the remaining LED load to reconfirm its compatibility with the existing driver, as driver changes may be required with moderate reduction in loads

Performance

  • Dimmable - OPTIONAL
  • WARM WHITE3000K
  • NEUTRAL DAYLIGHT5000K
  • Dimensions - Wiring Diagrams
  • Design Options
  • Photometric Data
  • FAQ

    Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

     
  • Downloads
  • Technical Specifications
    Product Model No. Input Voltage Watts per metre Beam Angle CRI Lumens per metre LEDs Per Metre Cutting Interval CCT Dim Add to Enquiry
    • Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      Close
    Model No.FLP24V10M/WW/SS Input Voltage240 Watts per metre6 Beam Angle115 CRI80 Lumens per metre300 LEDs Per Metre60 Cutting Interval100 CCT3000 Dim10000(L) x 10(W) x 2.5(H) Add to Enquiry Add Remove Remove
    Model No.FLP24V10M/DL/SS Input Voltage240 Watts per metre6 Beam Angle115 CRI80 Lumens per metre300 LEDs Per Metre60 Cutting Interval100 CCT5000 Dim1000(L) x 10(W) x 2.5(H) Add to Enquiry Add Remove Remove
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy.  Search a trade partner nearby 

Related Products