• SMART HOME

PIXIE MULTIFUNCTION CONTROL - SMF/BTAS G3

PIXIE SECONDARY DEVICE - SMART HOME digital push button multifunction control

Application

Ideal for residential designs, commercial interior spaces requiring multiple location device control

Design Specifications

  • Digital push button control to enable multifunction switching or dimming control, simply with an active and neutral termination.  All devices must be paired with a PIXIE Master device once installed, for functionality.

  • Three (3) complimentary key caps provided to suit most switch plates

  • Easy to install, dim and switch with ease, two wire termination mech.

  • Switch or dimming control is achieved only in conjunction with PIXIE Master controls.

  • Fully compatible with PIXIE and PIXIE PLUS

  • Slimline design to allow 1-6 gang configurations

Performance

  • Dimmable - YES
  • Dimmer Type - PAIRED WITH PIXIE MASTER DIMMER
    • Dimensions - Wiring Diagrams
    • Design Options
    • Photometric Data
    • FAQ

      Do you have any more questions? Simply check our FAQs page or contact our customer service team. 

       
    • Downloads
    • Technical Specifications
      Product Model No. Add to Enquiry
      Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single click
      		Input Voltage Body Colour Dim
      		Model No. SMF/BTAS Add to Enquiry Add Remove Remove Input Voltage 240 Body Colour WHITE CAP Dim 42(L) x 24(W) x 24(H)
    (1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
    With over 1000 Australian trade partners, finding where to buy SAL products is easy. Search a trade partner nearby

    Related Products